Club Car Precedent with 8V Batteries 4-Gauge Battery Cable Set (Years 2008.5-Up)

4-gauge black battery cable set for Club Car Precedent 08.5-Up models with 8V Batteries

Fitment:

• Club Car Precedent 2008.5-Up models with 8V Batteries

Features:

• 4-gauge wiring – better for upgrades such as motors, controllers, and solenoids
• High strand trimmed copper cables
• All cables are black PVC Insulation jacket
• Pre-cut & Professional Crimped with 5/16” Ring Terminals

Torque Specs:

• 5/16″ studs: 8–10 ft-lb
• 1/4″ studs: 6–7 ft-lb
• Always Check OEM Spec: Do not over torque which avoids cracking the post and ruining the battery
• After a week or two inspect for any wear or insulation rubbed off and retorque cables

Installation Order:

• Install all series jumpers first (battery to battery)
• Install controller/motor cables
• Positive (+) pack lead on first, negative (–) last
• Apply dielectric grease externally after tightening

Tech Tips:

• Key Off & Charger Unplugged
• Ensure Run/Tow switch is in the TOW position
• Disconnect the negative battery first
• Reconnect the positive first
• Take picture before starting as a reference during installation
• Use Insulated Tools, Protective Eye Wear, Gloves, Remove any jewelry
• Do not mix gauge size cables

Set Includes:

• (1) 9.5″ cable – Part# 17-321
• (2) 12″ cables – Part# 17-322
• (2) 23.5″ cables – Part# 17-325

OEM Cross Reference